Our 7-amp Universal Charger is compatible with 50-75Ah mobility scooter Sealed Lead Acid (SLA) and gel (AGM) batteries. This high-performance mobility scooter charger conditions and maintains your scooter's battery to ensure years of service even with regular use, so you don't have to worry about not having your scooter when you need it most.

The 7-amp universal mobility scooter charger is housed in a tough plastic casing, with a cable length of 235cm.

• Smart charger for 24V Sealed Lead Acid (SLA) and gel (AGM) batteries
• Input: 200-240Vac; 50-60Hz
• Output: 24Vdc/7.0A

Charger safety advice

It is vital that you always use the correct mobility scooter charger for your scooter battery. Using the wrong charger can cause damage to your battery as well as pose a fire hazard. Always consult your product manual or speak with one of our experts if in doubt.

While most electrical mobility devices use a standard 3 pin connector, some models reverse the positive and negative (such as TGA). Drive scooters and powerchairs use a different format of charger. If in doubt, please call our mobility experts for advice.

Caution!

• This charger is compatible with Sealed Lead Acid (SLA) and gel (AGM) batteries only
• Do not attempt to use this product to charge a Lithium battery.
• Indoor use only
• Do not remove the cover. Removing the cover risks electric shock
• Unplug the charger from the AC outlet after use
• Do not charge in very cold or very hot conditions
• Do not leave your charger on permanently - switch off and disconnect when your battery is fully charged
• Do not cover your charger or battery when in use
• Be careful not to overload your power sockets - avoid using extension leads, and if you do need an extension cable, use a reputable brand and unwind fully.
• Do not charge batteries outside where rain and condensation can affect the electrics