How do you put batteries into the handlebar lights.
Just received two lights with limited instructions.
Submitted by Andrea - Glasgow
You`re right, the instructions are not very clear. You have to pull the light out of the rubber casing, out through the front. The casing is very flexible and can be stretched to remove the light. The battery compartment is open, so just put the batteries in then push the light back into the casing. It might be easiest to put it in sideways then turn as you push in while pulling stretching the opening, then just make sure it is positioned correctly.
Do these lights show red or white? Do they flash?
Though my road legal scooter has lights I would feel safer with flashing higher intensity lights especially on the rear.
Submitted by Don - Cheshire
The BeSeen LED Safety Lights do not flash. They show in a white light. Thank you for your question.